A new control scheme for a single – phase diode clamped rectifier is proposed to achieve a unity power factor, balanced neutral point voltage and constant DC-bus voltage. Four power switches are used in the rectifier to generate a three-level PWM wave form on the rectifier terminal voltage.The line current command is derived from a DC-link voltage regulator and an output power estimator. The hysteresis current Controller is used to track the line current command. To balance the neutral-point voltage, a capacitor voltage compensator is employed. The main advantages of using a three-level instead of a two-level PWM scheme are that the blocking voltage of each power switch is clamped to half the DC-bus voltage (if the off –state resistance of power switches is equal),and the voltage harmonic on the AC side of rectifier is reduced.
No comments:
Post a Comment